Print Supplies
Print Supplies
-
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (5-(Pack)) 3DNF0017505-5$444.60Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (4-(Pack)) 3DNF0017505-4$355.68Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (3-(Pack)) 3DNF0017505-3$266.76Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (2-(Pack)) 3DNF0017505-2$177.84Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) 3DNF0017505-1$32.50Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
SainSmart Purple Flexible TPU 3D Printing Filament 1.75 mm 0.8 kg Dimensional Accuracy +/- 0.05 mm TPU-PUR-0.8KG1.75$27.13Description:SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it theperfect choice for most printers on the market.Specification:Diameter: 1.75 mmMaterial: Flexible TPUNet Weight: 0.8 kgShore Hardness: 95 ARecommended Printer SettingsPrint Nozzle: 0.4 – 0.8 mmExtruder Temperature: 195 – 230°CPrint Bed Temperature: 40 – 60°CCooling Fan: OnPrinting Tips For Bowden Drive PrintersPrint Slower: 15 – 30 m/sFirst Layer Settings: 100% Height. 150% Width, 50% SpeedDisable Retraction: Should reduce oozing and stringingCooling Fan: On after first layerIncrease Multiplier: 1.1, should increase bondingDo not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear.Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding.What’s in The Package1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccant Learn More -
SainSmart Pink Flexible TPU 3D Printing Filament 1.75 mm 0.8 kg Dimensional Accuracy +/- 0.05 mm TPU-PNK-0.8KG1.75$28.76Description:SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it theperfect choice for most printers on the market.Specification:Diameter: 1.75 mmMaterial: Flexible TPUNet Weight: 0.8 kgShore Hardness: 95 ARecommended Printer SettingsPrint Nozzle: 0.4 – 0.8 mmExtruder Temperature: 195 – 230°CPrint Bed Temperature: 40 – 60°CCooling Fan: OnPrinting Tips For Bowden Drive PrintersPrint Slower: 15 – 30 m/sFirst Layer Settings: 100% Height. 150% Width, 50% SpeedDisable Retraction: Should reduce oozing and stringingCooling Fan: On after first layerIncrease Multiplier: 1.1, should increase bondingDo not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear.Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding.What’s in The Package1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccant Learn More -
SainSmart Emerald Flexible TPU 3D Printing Filament 1.75 mm 0.8 kg Dimensional Accuracy +/- 0.05 mm TPU-EMR-0.8KG1.75$29.99Description:SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it theperfect choice for most printers on the market.Specification:Diameter: 1.75 mmMaterial: Flexible TPUNet Weight: 0.8 kgShore Hardness: 95 ARecommended Printer SettingsPrint Nozzle: 0.4 – 0.8 mmExtruder Temperature: 195 – 230°CPrint Bed Temperature: 40 – 60°CCooling Fan: OnPrinting Tips For Bowden Drive PrintersPrint Slower: 15 – 30 m/sFirst Layer Settings: 100% Height. 150% Width, 50% SpeedDisable Retraction: Should reduce oozing and stringingCooling Fan: On after first layerIncrease Multiplier: 1.1, should increase bondingDo not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear.Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding.What’s in The Package1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccant Learn More
