3D Printer Cartridges
3D Printer Cartridges
-
NOVAMAKER 3D Printer Filament - Grey 1.75mm PLA Filament PLA 1kg(2.2lbs),Dimensional Accuracy +/- 0.03mm NV-PLA175-GR$29.99 $29.99NovaMaker Grey PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More -
Comgrow 3D Printer PLA Filament 1.75mm 1KG Spool Grey US1-Gray-FBA$26.99 $26.99Out of stockWe recommended storing filament in a sealed plastic bag or box, after each print, be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use. 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight PLA Plastic (Polylactic Acid) Recommended Extrusion/Nozzle Temperature 180°C - 215°C. Learn More -
eSUN 3mm Grey PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs) Actual Diameter 2.85mm +/- 0.05mm Grey (Pantone 2107C) IG-C-PLAPRO300H1$23.88******This is 3mm/2.85mm filament******. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns. There are too many such wrong size returns.eSUN 3D Printer Filament: PLA PRO Size: 3mm nominal, 2.85 +/-0.05mm actualExtrusion Temperature Range: 210 to 225 Celsius PLA PRO(PLA+) Advantages: Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. PLA PRO prints about 20 Celsius higher than regular PLA and produces strong prints. Learn More -
AIO Robotics Universal Premium Filament Bundle PLA True Popular Pantone Colors (Multi-Pack of 12) ZEUS-Premium-Filament$29.99Out of stockTwelve 500G spools of premium PLA filament in a bundle package. Only popular filament colors for a great price! top quality. Learn More -
Monoprice PLA 3D Printer Filament - Grey - 1kg Spool 1.75mm Thick | for All PLA Compatible Printers 111778$36.52Get outstanding 3D printing results when you use 1.75mm PLA 3D printer filament from Monoprice! Pla is a good choice for a printing material If you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). thickness and roundness factors are laser measured at the Factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More -
PLA Filament 3D Hero PLA Filament 1.75mm,PLA 3D Printer Filament Dimensional Accuracy +/- 0.02 mm 2.2 LBS(1KG),1.75mm Filament,Grey US-HO-PLA-Grey$29.99Out of stockLight Grey PLA 3D Printer Filament 1. 75mm 1KG Spool, Dimensional Accuracy +/- 0. 02 mm - NO Clogging ✮✮✮ Filament Features ✮✮✮ Material: PLA(Polylactic Acid) Color: Grey Net Weight: 1KG Diameter: 1. 75mm PLA Filament (Dimensional Accuracy +/- 0. 02mm) Recommended Extrusion/Nozzle Temperature: 190°C - 220°C (374°F - 428°F ) ✓100% WORRY-FREE SATISFACTION 100% worry-free satisfaction offered to let you buy with confidence; no questions asked. So, why think twice? ORDER NOW ➤ Get this Incredible PLA filament 1Kg Spool for 3D printers ➤Delivery in Just 3-5 Days! Learn More -
DURAMIC 3D Premium PLA Plus Printer Filament 1.75mm 3D Printing Filament with Build Surface 200 x 200mm 1kg Spool(2.2lbs) Dimensional Accuracy +/- 0.05 mm Grey PLA-PLUS-Grey$39.99 $39.99Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 1 x spool of PLA filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More -
SUNLU PLA 3D Printer Filament PLA Filament 1.75mm Dimensional Accuracy +/- 0.02 mm 1 KG Spool PLA Grey 1.75-PLA-Grey$18.99These 1. 75mm PLA filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, and safe, with no odor during the printing Buy with Confidence, 100% Satisfaction . E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Temperature Recommended Extrusion/Nozzle Temp: 190°C - 220°C (374℉~ 428℉)， Heated Bed Temp: 25°C - 60°C (77℉~ 140℉) Filaments Diameter and Accuracy: 1. 75 mm +/- 0. 02mm Filaments Net Weight: 1 kg (2. 2 lbs) Packaging Included: 1 × spool of PLA filaments Learn More -
DURAMIC 3D PETG Printer Filament 1.75mm Grey 3D Printing Filament with Build Surface 7.87 x7.87in 1kg Spool(2.2lbs) Dimensional Accuracy +/- 0.05 mm PETG-Grey$42.99 $42.99Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More -
eSUN 1.75mm Grey PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs) Grey IG-C-PLAPRO175H1$22.99Extracted and purified from corn grain; high rigidity, good glossiness and transparency; suitable for printing larger models; toughness is 10 times more than the PLA on the market. No wiredrawing problems, The surface of the printouts will be smoother and more delicate; no cracking problem. Learn More -
Mika3D 1.75mm 3D Printer Normal PLA Filament 12 Bundle Most Popular Colors Pack 1.75mm 500g per Spool 12 Spools Pack Total 6kgs Material with One Bottle of 3D Printer Stick Gift Mika3D MikaPLA12Bundle$179.99 $179.99Do You Want one Big Box 3D Printing Filament Bundle Include Most Popular Normal PLA Filament Colors? To Print the 3D Objects in Different Colors as Your Like?Mika3D 12 in 1 Normal Popular PLA Filament Bundle Satisfy You, To Support Your Innovation and Design in 3D Printing World Very Well! Learn More -
TPU 3D Printer Filament 1.75mm Grey Flexible,TECBEARS TPU Printing Filament 0.5 KG(1.1LB),Dimensional Accuracy +/- 0.02 TPU003$15.99Why Buy From TECBEARS TECBEARS PLA filament is renowned for its high strength and flexibility. Proven to maintain smooth and consistent printing experience that achieves best printing result. TECBEARS 3D Printer filament is always round, with no oily residue, no air bubbles, no kinks or breaks. Weight: 1KG (approximately 2.2 lbs) Diameter: 1.75mm(Dimensional Accuracy +/- 0.02mm) Recommended Extrusion/Nozzle Temperature: 190°C - 240°C (374°F - 464°F ) ✔High Compatibility:To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. ✔Authentic Materials:100% virgin pure raw materials, Non-toxic, Eco-friendly. ✔+/-0.02mm Dimensional Accuracy:Stable dimensional accuracy bring you smooth printing experince,no extruder nozzle blocked. ✔Perfect After-sales Service: 30-Day Money Back, 2-Year Warranty and 24x7 customer support with technical advice. Learn More -
3D Printer PLA Filament 1.75mm Grey,TECBEARS 3D Printing Filament Dimensional Accuracy +/- 0.02 mm 2.2LBS (1 Kg) Spool No-Tangle PLA003$20.99Why Buy From TECBEARS TECBEARS PLA filament is renowned for its high strength and flexibility. Proven to maintain smooth and consistent printing experience that achieves best printing result. TECBEARS 3D Printer filament is always round, with no oily residue, no air bubbles, no kinks or breaks. Weight: 1KG (approximately 2.2 lbs) Diameter: 1.75mm(Dimensional Accuracy +/- 0.02mm) Recommended Extrusion/Nozzle Temperature: 190°C - 240°C (374°F - 464°F ) ✔High Compatibility:To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. ✔Authentic Materials:100% virgin pure raw materials, Non-toxic, Eco-friendly. ✔+/-0.02mm Dimensional Accuracy:Stable dimensional accuracy bring you smooth printing experince,no extruder nozzle blocked. ✔Perfect After-sales Service: 30-Day Money Back, 2-Year Warranty and 24x7 customer support with technical advice. Learn More
