Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More
Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More
Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More
Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More
Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More
Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 5.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 6.Please reseal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 7.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 8.Different 3D printers may need different settings, we recommend you to print the draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 3 kg (1kg/Spool) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 3 x spool of PLA filaments 3 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 1 x spool of PLA filaments 1 x Build surface Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please reseal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings, we recommend you to print the draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 3 kg (1kg/Spool) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 3 x spool of PLA filaments 3 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 1 x spool of PLA filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 1 x spool of PLA filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 5.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 6.Please reseal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 7.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 8.Different 3D printers may need different settings, we recommend you to print the draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 3 kg (1kg/Spool) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 3 x spool of PLA filaments 3 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 1 x spool of PLA filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 1 x spool of PLA filaments 1-Month Free Trial, Lifetime Quality Promise and Money-back Service Learn More
When your project calls for a high volume of labeling, you’ll need the right amount of label to accommodate. The Avery Dot Matrix Printer Address Labels are designed to create thousands of professional-looking rectangle labels without reloading or reprinting. Specially designed for pin feed and dot matrix printers, the continuous-form sheets include 12 white mailing labels per perforated sheet. Having a label without a strong stick can ruin any labeling project. Designed to permanently stick to and stay, the printable labels includes a strong adhesive that can onto a variety of surfaces without lifting or curling. Easily create your own customizable labels with the free design, templates, and mail merge tools at avery.com/templates. Use the multipurpose labels to produce address labels, labels for storage bins, and organization labels. The rectangle white labels are sized at 15/16" x 3 1/2", and the pack includes 5,000 labels. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface Month Free Trial, Lifetime Quality Promise and Money-back Service Learn More
Fast Server Corp is not responsible for data, typographical, or photographic or technical errors. Pricing and availability are subject to change without notice!!!
All trademarks, service marks, product names and logos appearing on this site are the property of their respective owners. Use of them does not imply any affiliation with or endorsement by them.
We can send formal quotes or bids upon request.
Please submit contact form to request a quote.
We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 858P6 | D.U.N.S #: 08-055-2103 | UNGM #: 571579