Affordable 10-Gigabit Switching Solution for Growing SMBs In a world of expanding enterprises and growing virtualization, cloud-based services and applications, like VoIP, HD streaming video, and IP surveillance, SMB networks need to evolve beyond simple reliability to provide increased scalability, higher bandwidth, and enhanced performance. TP-LINK's new T1700 Series 10G Smart Switches represent an ideal solution that meets these requirements. The series includes the T1700X-16TS Full 10-Gigabit Smart Switch and the T1700G-28TQ Gigabit Stackable Smart Switch with 10G Uplink, which both provide high levels of performance, scalability, and cost-effectiveness that SMBs require from their 10G networking solutions. Interface Available: 24 x 10/100/1000Mbps RJ45 Ports, 4 fixed 10G SFP+ Slots, 16; Internal Memory: 1.5MB; Protocols Supported: IEEE 802.3i IEEE 802.3u IEEE 802.3ab IEEE802.3z IEEE 802.3ae IEEE 802.3ad IEEE 802.3x IEEE 802.1d IEEE 802.1s IEEE 802.1w IEEE 802.1q IEEE 802.1x IEEE 802.1p; System Requirement: Microsoft Windows XP Vista, or Windows 7 Windows 8/8.1 MAC OS NetWare UNIX or Linux. Learn More
24 PoE+ ports (802.3af/at) providing up to 30W per port/ 384W total PoE power supply for multi-use(wireless access points, VoIP phone, IP Camera) 24 Gigabit Ethernet ports deliver up to 2 Gbps of dedicated, non-blocking bandwidth per port Configure VLAN, Static Routing, QoS, IGMP Snooping, Link Aggregation, L2PT, Loopback Detection, STP/RSTP/MSTP, LLDP, LLDP-MED,Web-based GUI, SNMP, rate limiting and traffic monitoring on the switch ACL, IP-MAC-Port Binding, 802.1x and Radius Authentication, Port Security, Storm Control, SSL and SSH encryptions and Dos Defend for your Network Security Segment your network and prioritize your traffic Add intelligence to your network beyond what unmanaged switches can provide IPV6 Support. 1U Rackmountable form factor LIMITED LIFETIME WARRANTY and 24/7 Tech Support from TP-Link Interface Available: 16 x 10/100/1000Mbps RJ45 Ports, AUTO Negotiation/AUTO MDI/MDIX; Internal Memory: 4.1Mbit; Protocols Supported: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3x IEEE 802.1q IEEE 802.1p; System Requirement: Microsoft Windows for running Utility Learn More
Introducing the NETGEAR GS110TUP Ultra60 PoE++ 10-Port Gigabit Ethernet Smart Managed Pro Switch with 4 ports PoE++, 4 ports PoE+, and 1 Gigabit Copper and 1 SFP uplinks with Remote/Cloud management activation. Learn More
Designed for workgroups and departments, T2500G-10TS from TP-Link provides full set of layer 2 management features. It delivers maximum throughput where you need it — to high-performance workgroups at the edge of the network, or as a backbone for Gigabit switches and high-speed servers in demanding small networks. Moreover, T2500G-10TS switch also comes equipped with 2 SFP slots, giving you greater network flexibility. T2500G-10TS is designed exclusively for the networking needs of growing businesses, with an extensive suite of management features and security functions available. These TP-Link products are cost-effective for small and medium-sized businesses, making them ideal networking solutions. Learn More
Connect a Wide Range of Devices This 3 foot USB to Micro USB cable features one USB A male connector, and one Micro B male connector, providing a high quality connection to USB 2.0 mobile devices (such as BlackBerry or Android based phones, digital cameras, tablets or GPS systems) that use a Micro USB connector to a USB capable computer for everyday tasks such as data synchronization and file transfers. Designed with Quality in Mind This Micro USB phone charger cable features aluminum-myler foil with braided shielding, high quality USB A and Micro B connectors and is constructed with durable PVC material to ensure a dependable, long-lasting connection between your USB and Micro USB devices. Enjoy High Speeds Quickly charge and sync your Micro USB devices with this USB A to Micro B charging cable. You’ll be able to transfer data, connect to various USB devices, and provide power while charging your Micro USB device at transfer rates up to 480 Mbps. This USB to Micro USB phone charging cable is backed by a StarTech.com lifetime warranty and free lifetime technical support. Learn More
TP-Link's JetStream T2600G-28SQ provides high performance, powerful L2 and L2+ features like static routing, enterprise-level QoS, advanced security strategies and ISP grade traffic control and monitoring features. With 24 gigabit SFP slots, 4 10/100/1000 Mbps RJ45 ports and 4 10G SFP+ slots, T2600G-28SQ ensures a highly stable and high-speed network environment. The IP-MAC-Port Binding (IMPB) and Access Control List (ACL) functions protect against broadcast storm, ARP and Denial-of-Service (DoS) attacks, etc. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. The OAM and DDM functions help facilitates network management. Moreover, the easy-to-use web management interfaces, along with CLI, SNMP and Dual Image mean faster setup and configuration with less downtime. TP-Link JetStream L2 managed Switches T2600G-28SQ provides a reliable, secure solution for enterprise, campus and ISP networks. Learn More
The NETGEAR GS724TPP 24-Port Gigabit Ethernet Smart Managed Pro PoE+ Switch with 2 Gigabit SFP ports is remote/cloud manageable and provides a total PoE budget of 380W for wireless networks IP surveillance and video-over-IP deployments Learn More
Introducing the NETGEAR GS710TUP Ultra60 PoE++ 10-Port Gigabit Ethernet Smart Managed Pro Switch with 8 ports PoE++ and 1 Gigabit Copper and 1 SFP uplinks with Remote/Cloud management activation GS710TUP provides a total PoE budget of 480W for powerful PoE applications Learn More
The NETGEAR GS752TPSB Smart Managed Pro Power over Ethernet (PoE) Switch is stackable, designed for desktop or rackmount, and features 48-Ports of Gigabit Ethernet, 48 x PoE/PoE+ ports with a 384 watt budget, 4 x 1G SFP ports (2 are shared), 2 x 1G/2.5G SFP ports, ProSAFE Lifetime Protection and more. Learn More
The NETGEAR GS110TPP 8-Port PoE Gigabit Smart Managed Pro Switch with 2 Gigabit uplinks and 120W PoE budget gives high-speed connectivity and power for wireless converged networks, IP surveillance and mobility. Advanced features such as Layer 3 static routing, IPv6 management, ACL, DiffServ QoS, LACP bonding and Spanning Tree will satisfy even the most advanced small business networks. This switch also comes with Cloud management activation (subscription-based) and NETGEAR Flex Poe upgradable power budget. Learn More
Tp-link’s Jetstream Gigabit Smart switch T1500G-8T is especially designed for the small and medium business networks that require efficient network management. T1500G-8T comes with a Comprehensive set of features, such as link aggregation group, 802.1Q VLAN, access control lists (ACL), quality of service (QoS L2 to L4), Storm control and IGMP Snooping to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. What’s more, its easy-to-use web management interface means faster setup and configuration with less downtime, providing the ideal solution for your business network. Interface Available: 8 x 10/100/1000Mbps RJ45 Ports, Port8 obtain power from PoE source, (Auto-Negotiation/Auto MDI/MDIX); Protocols Supported: IEEE 802.3i IEEE 802.3u IEEE 802.3ab IEEE802.3z IEEE 802.3ad IEEE 802.3x IEEE 802.3af IEEE 802.1d IEEE 802.1s IEEE 802.1w IEEE 802.1q IEEE 802.1x IEEE 802.1p; System Requirement: Microsoft Windows 98SE NT 2000 XP Vista, or Windows 7/8 MAC OS NetWare UNIX or Linux Learn More
CT2K8G3S160BM is an 16GB kit consisting of two 8GB DDR3L (DDR3 low voltage) Notebook modules that operate at speeds up to 1600 MT/s and has a CL11 latency. It is dual voltage and can operate at 1.35-Volt or 1.5-Volt. It is Unbuffered and is non-ECC. It conforms to the industry standard SODIMM layout of 204-Pins and is compatible with computers that take DDR3 SODIMM memory. This is Apple specific memory, compatible with the models listed here: Mac Mini 2.3GHz Quad-Core Intel Core i7 - Late 2012 / Mac Mini 2.5GHz Dual-Core Intel Core i5 - Late 2012 / Mac Mini 2.6GHz Quad-Core Intel Core i7 - Late 2012 Mac mini (Late 2012) / Mac mini Server (Late 2012) / MacBook Pro (13-inch and 15-inch, Mid 2012) / MacBook Pro 2.3GHz Intel Core i7 (15-inch DDR3) Mid-2012 / MacBook Pro 2.5GHz Intel Core i5 (13-inch DDR3) Mid-2012 / MacBook Pro 2.6GHz Intel Core i7 (15-inch DDR3) Mid-2012 / MacBook Pro 2.7GHz Intel Core i7 (15-inch DDR3) Mid-2012 / MacBook Pro 2.9GHz Intel Core i7 (13-inch DDR3) Mid-2012 / iMac (27-inch, Late 2012 & Late 2013) / iMac (Retina 5K, 27-inch, Late 2014 & Mid 2015) / iMac 2.9GHz Quad-Core Intel Core i5 (27-inch, Late 2012) / iMac 3.2GHz Quad-Core Intel Core i5 (27-inch, Late 2012, Late 2013, Mid 2014) / iMac 3.3GHz Quad-Core Intel Core i5 (27-inch, Mid 2015) / iMac 3.4GHz Quad-Core Intel Core i5 (27-inch, Late 2013 & Mid 2014) / iMac 3.4GHz Quad-Core Intel Core i7 (27-inch, Late 2012) / iMac 3.5GHz Quad-Core Intel Core i7 (27-inch, Late 2013, Mid 2014 & Late 2014) / iMac 3.5GHz Quad-Core Intel Core i5 (27-inch, Mid 2015) / iMac 4.0GHz Quad-Core Intel Core i7 (27-inch, Late 2014) / iMac 4.0GHz Quad-Core Intel Core i5 (27-inch, Mid 2015). When in doubt please check for compatibility on crucial.com’s memory selector tools. Learn More
The 1U vented server rack mount shelf has an adjustable depth of 19.5-38in and lets you add a compact, 1U shelf to almost any standard 19in server rack or cabinet with front/rear mount options. It’s versatile design ensures it works great for all your computer, AV, network and data equipment needs; perfect for IT and business professional alike. This vented rack shelf helps to improve air flow and lower temperatures in the rack, ultimately helping to extend the life of your equipment and keep it safe. Constructed using SPCC commercial grade cold-rolled steel, this durable rack shelf can hold up to 250 lb / 113 kg of equipment - a perfect solution for storing heavy, non rack mount equipment, tools, peripherals or accessories in your rack or cabinet to keep them readily accessible. The rugged steel construction holds up to even the harshest industrial environments, helping to keep your equipment safe. This universal studio rack shelf is a TAA compliant product and adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. This 1U adjustable rack tray shelf is backed by a StarTech.com lifetime warranty and free lifetime technical support. Learn More
The 4U wall mounting rack allows you to free up desk or floor space - perfect for any location with limited space available. The rack also has a built-in shelf to create a sturdy surface for storing media / IT equipment that is not rack-mountable. The wall mount bracket features an adjustable mounting from 12 inches to 18 inches deep as well as a dual-position 12in. shelf that can be at either the top or the bottom depending on the rack’s positioning. Can be used to store home servers, patch panels and switches. The equipment rack can hold a total of up to 75.2 lb. [34 kg] and has a total product height of 10.6 in [26.8 cm]. The 2-post wall mount network equipment rack is constructed of solid steel to ensure a sturdy and safe mounting solution for your mission-critical equipment and with the wall mounting holes positioned 16” apart, it exactly matches standard drywall construction framework, to ensure simple and secure wall-stud anchoring. For hassle-free equipment installation, the rack features 10-32 tapped rails, so you can mount your equipment directly to the rail and avoid the hassle of using cage nuts. The wall mount rack comes in a flat-packed box to reduce shipping volume, which significantly reduces your costs in shipping while also providing greater protection than offered by pre-assembled racks. The 4U wall mount rack with shelf is backed by a StarTech.com lifetime warranty and free lifetime technical support. It also meets EIA/ECA-310-E industry standards. Learn More
The N201-001-PU Cat6 Gigabit snagless molded UTP patch cable (M/M) is recommended for distributing data, Voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this one-foot Purple cable ensures peak performance throughout your local area network (LAN). it reduces impedance and structural return loss compared to standard 100 mhz wire. Manufactured from 24 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded UTP N201-001-PU delivers speeds up to 550 mhz/1 Gbps with minimal near-end crosstalk (next). the RJ45 short-body connectors’ snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. The N201-001-PU meets Cat6 cabling standards. Lifetime limited Warranty. Learn More
The N201-002-PU Cat6 Gigabit snagless molded UTP patch cable (M/M) is recommended for distributing data, Voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this two-foot Purple cable ensures peak performance throughout your local area network (LAN). it reduces impedance and structural return loss compared to standard 100 mhz wire. Manufactured from 24 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded UTP N201-002-PU delivers speeds up to 550 mhz/1 Gbps with minimal near-end crosstalk (next). the RJ45 short-body connectors’ snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. The N201-002-PU meets Cat6 cabling standards. Lifetime limited Warranty. Learn More
The N201-002-OR Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this two-foot Orange cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Manufactured from 24 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded UTP N201-002-OR delivers speeds up to 550 MHz/1 Gbps with minimal near-end crosstalk (NEXT). the RJ45 short-body connectors’ snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. The N201-002-OR meets Cat6 cabling standards. Lifetime Limited Warranty. Learn More
The N201-050-OR Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire.This 50-foot orange cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair solid UTP with a rugged PVC jacket, the N201-050-OR delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11). Learn More
The N201-050-PU Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire.This 50-foot purple cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair solid UTP with a rugged PVC jacket, the N201-050-PU delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11). Learn More
The N201-008-WH Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire.This eight-foot white cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-008-WH delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11). Learn More
The N201-004-GN Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. This four-foot green cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-004-GN delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11). Learn More
The N201-008-BL Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire.This eight-foot blue cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-008-BL delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11). Learn More
The N201-008-BK Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire.This eight-foot black cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-008-BK delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11). Learn More
The N201-004-WH Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. This four-foot white cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-004-WH delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11). Learn More
Fast Server Corp is not responsible for data, typographical, or photographic or technical errors. Pricing and availability are subject to change without notice!!!
All trademarks, service marks, product names and logos appearing on this site are the property of their respective owners. Use of them does not imply any affiliation with or endorsement by them.
We can send formal quotes or bids upon request.
Please submit contact form to request a quote.
We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 858P6 | D.U.N.S #: 08-055-2103 | UNGM #: 571579