Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D printer filament from Monoprice! Pla is a good choice for a printing material If you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). thickness and roundness factors are laser measured at the Factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 0.5 kg spool features a thickness of 1.75mm ±0.05mm. It has a nominal processing temperature of 180 ~ 210°C (356 ~ 410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 0.5 kg spool features a thickness of 1.75mm ±0.05mm. It has a nominal processing temperature of 180 ~ 210°C (356 ~ 410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PETG printing filaments are produced with USA raw material with high purity. Duramic PETG filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in a cost-effective price. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid moisture. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 240±10°C (446℉ - 482℉) Heated Bed Temp: 70°C - 80°C (158℉ - 176℉) Printing Speed: 30-70mm/s What you get: 1 x spool of PETG filaments 1 x Build surface Month Free Trial, Lifetime Quality Promise and Money-back Service Learn More
Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Blending a mixture of plant-based materials and polymers creates HATHCHBOX 3D Printer's PLA, making this material more Nature-friendly. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. The 3D printed object will have a glossy type finish with we love it: Less warping Easy to use No heated bed required Nature-friendly. Learn More
These 1.75mm PLA filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, eco-friendly and safe, with no odor during the printing Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Temperature Recommended Extrusion/Nozzle Temp: 190°C - 220°C (374℉~ 428℉), Heated Bed Temp: 25°C - 60°C (77℉~ 140℉) Filaments Diameter and Accuracy: 1.75 mm +/- 0.02mm Filaments Net Weight: 1 kg (2.2 lbs) Packaging Included: 1 × spool of PLA filaments Learn More
These 1. 75mm PLA filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, and safe, with no odor during the printing Buy with Confidence, 100% Satisfaction . E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Temperature Recommended Extrusion/Nozzle Temp: 190°C - 220°C (374℉~ 428℉), Heated Bed Temp: 25°C - 60°C (77℉~ 140℉) Filaments Diameter and Accuracy: 1. 75 mm +/- 0. 02mm Filaments Net Weight: 1 kg (2. 2 lbs) Packaging Included: 1 × spool of PLA filaments Learn More
Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Blending a mixture of plant-based materials and polymers creates HATHCHBOX 3D Printer's PLA. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. The 3D printed object will have a glossy type finish with we love it: Less warping Easy to use No heated bed required Nature-friendly. Learn More
Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Blending a mixture of plant-based materials and polymers creates HATHCHBOX 3D Printer's PLA, making this material more nature-friendly. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. The 3D printed object will have a glossy type finish with we love it: Less warping Easy to use No heated bed required. Learn More
Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Blending a mixture of plant-based materials and polymers creates HATHCHBOX 3D Printer's PLA. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. The 3D printed object will have a glossy type finish with we love it: Less warping Easy to use No heated bed required. Learn More
Fast Server Corp is not responsible for data, typographical, or photographic or technical errors. Pricing and availability are subject to change without notice!!!
All trademarks, service marks, product names and logos appearing on this site are the property of their respective owners. Use of them does not imply any affiliation with or endorsement by them.
We can send formal quotes or bids upon request.
Please submit contact form to request a quote.
We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 858P6 | D.U.N.S #: 08-055-2103 | UNGM #: 571579