Search results for: 'security+software'[0]'[0]'
-
eSUN 1.75mm Orange PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs) Orange IG-C-PLAPRO175O1$22.99eSUN 3D Printer Filament: PLA PRO Color: Orange Extrusion Temperature Range: 205 to 225 PLA PRO(PLA+) Advantages: Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem.Prints are hard to break. PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most user prints at around 210 to 215 Celsius. Other settings are about the same.INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs. Learn More
-
Comgrow 3D Printer PLA Filament 1.75mm 1KG Spool Yellow US1-Yellow-FBA$26.99 $26.99Out of stockWe recommended storing filament in a sealed plastic bag or box, after each print, be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use. 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight PLA Plastic (Polylactic Acid) Recommended Extrusion/Nozzle Temperature 180°C - 215°C Learn More
-
Comgrow 3D Printer PLA Filament 1.75mm 1KG Spool Red US1-Red-FBA$29.99Out of stockWe recommended storing filament in a sealed plastic bag or box, after each print, be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use. 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight PLA Plastic (Polylactic Acid) Recommended Extrusion/Nozzle Temperature 180°C - 215°C. Learn More
-
Comgrow 3D Printer PLA Filament 1.75mm 1KG Spool Grey US1-Gray-FBA$26.99 $26.99Out of stockWe recommended storing filament in a sealed plastic bag or box, after each print, be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use. 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight PLA Plastic (Polylactic Acid) Recommended Extrusion/Nozzle Temperature 180°C - 215°C. Learn More
-
Dremel Nylon 3D Printer Filament 1.75 mm Diameter Black DF45-NYP-B$34.49Dremel Nylon filament has been specifically engineered for optimal printing with your Digi lab 3D45. Nylon is a thermal plastic that softens and melts when it's heated, building your designs layer by layer. Parts made from Dremel's Nylon are stronger, more flexible and more durable than parts made from traditional PLA. Learn More
-
HATCHBOX PLA 3D Printer Filament Dimensional Accuracy +/- 0.03 mm 1 kg Spool 1.75 mm Yellow 3D-PLA-1KG1.75-YLW$24.99Welcome to Hatchbox 3D Printer Filament Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Won't the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape. *When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy. Learn More
-
eSUN 1.75mm Fire Engine Red PLA PRO (PLA+) 3D Printer Filament 1KG Refill (2.2lbs) Fire Engine Red Refill for eSUN spools only R-PLAPRO175FER1$21.99eSUN PLA+ refill. Color: Fire Engine RedSize: 1.75mm Designed to reuse and ONLY work with any eSUN empty spools of PLA+.The main purpose of refills are to reduce wastes by reusing empty eSUN spools. Refill manufacturing requires more steps than spooled manufacturing. Learn More
-
eSUN 1.75mm PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs) Fire Engine Red (Pantone 199C) IG-C-PLAPRO175FER1$22.99Extracted and purified from corn grain; high rigidity, good glossiness and transparency; suitable for printing larger models; toughness is 10 times more than the PLA on the market. No wiredrawing problems, The surface of the printouts will be smoother and more delicate; no cracking problem. Learn More