Why will you choose TECBEARS TECBEARS ABS 3D printer filaments have Good transparency and gloss, suitable for crafts, model and industrial components. One of the most commonly used 3D printer materials, ABS (Acrylonitrile Butadiene Styrene) makes a great choice when creating durable items that can stand up to wear and tear and that require a higher resistance to heat. ABS plastic is flexible and breakable. The ABS 3D printer filament works best with a heated printing surface (to prevent cooling and contracting, which leads to warping), and it can be given a glossy finish after processing. High Compatibility: To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. Healthy: All of products have passed the RoHS Directive, made by 100% polylactic acid. Density is small, when printing larger volume model lighter, economical. Fast and effective 24 x 7 professional customer support providing technical solutions. Notes: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, ABS filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.> Specification: Diameter: 1.75 mm Net Weight: 2.2Bl(1kg) Best use temperature:446°F-518°F (230°C-270°C) Extruder Temperature: 176°F-248°F (60°C-80 °C) Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!" Learn More
Why will you choose TECBEARS TECBEARS ABS 3D printer filaments have Good transparency and gloss, suitable for crafts, model and industrial components. One of the most commonly used 3D printer materials, ABS (Acrylonitrile Butadiene Styrene) makes a great choice when creating durable items that can stand up to wear and tear and that require a higher resistance to heat. ABS plastic is flexible and breakable. The ABS 3D printer filament works best with a heated printing surface (to prevent cooling and contracting, which leads to warping), and it can be given a glossy finish after processing. High Compatibility: To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. Healthy: All of products have passed the RoHS Directive, made by 100% polylactic acid. Density is small, when printing larger volume model lighter, economical. Fast and effective 24 x 7 professional customer support providing technical solutions. Notes: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, ABS filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.> Specification: Diameter: 1.75 mm Net Weight: 2.2Bl(1kg) Best use temperature:446°F-518°F (230°C-270°C) Extruder Temperature: 176°F-248°F (60°C-80 °C) Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!" Learn More
3D Solutech is a professional 3D printer filament manufacturer specialized in providing various colors and materials for 3d printing.Quality is our top priority as we hand check each spool and vacuum seal. 3D Solutech PLA filament is proven to maintain smooth and consistent printing experience that achieves best printing result.3D Solutech 3D Printer filament is always round, with no oily residue, no air bubbles, no kinks or breaks. Polylactic Acid commonly known as PLA is frequently used thermoplastic material and a heated print bed is not required for this type of materials.Check out our store for new and latest colors and materials for your 3d printer. Ultra smooth technology, With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Vacuum sealed, Our vacuum sealed packaging guarantees you to experience the best performance by isolating moisturized environment to the filaments. High compatibility, Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. Package Includes: 1 X 1.75mm PLA filament (2.2Lbs) 1 X Filament Clip Learn More
Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It's ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish with ABS. Why we love it: Prints at higher temperature Tough and durable Requires less manual finishing Process in acetone for polished finish. Learn More
Welcome to Hatchbox 3D Printer Filament Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Won't the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape. *When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy. Learn More
Welcome to Hatchbox 3D Printer Filament Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Won't the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape. *When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy. Learn More
Welcome to Hatchbox 3D Printer Filament Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Won't the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape. *When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy. Learn More
Fast Server Corp is not responsible for data, typographical, or photographic or technical errors. Pricing and availability are subject to change without notice!!!
All trademarks, service marks, product names and logos appearing on this site are the property of their respective owners. Use of them does not imply any affiliation with or endorsement by them.
We can send formal quotes or bids upon request.
Please submit contact form to request a quote.
We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 858P6 | D.U.N.S #: 08-055-2103 | UNGM #: 571579