Simplify Your Efficient & Colorful Life At Xvico ! FEATURES: Color: Random Multi Color Weight: 1KG (approximately 2.2 lbs) Diameter: 1.75mm(Dimensional Accuracy +/- 0.02mm) Recommended Extrusion/Nozzle Temperature: 190°C - 240°C (374°F - 464°F ) Recommended Base Plate/Print Bed Temperature: No heated/(50 - 80)°C Bubble: no-bubble ✔High Compatibility:To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. ✔Authentic Materials:100% virgin pure raw materials, Non-toxic, Eco-friendly. ✔+/-0.02mm Dimensional Accuracy:Stable dimensional accuracy bring you smooth printing experince,no extruder nozzle blocked. ✔Perfect After-sales Service:30-Day Money Back, 2-Year Warranty and 24x7 customer support with technical advice.✔It is recommended to print something in large size, so that the color change will be more obvious Learn More
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers. MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is to have no heavy metals, phthalates, or BPA. Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints. Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18. Glass Temp: 60-65 C (140-149 F) Melting Temp: 150-160 C (302-320 F) Nozzle Temp: 230 C (446 F) Spool Diameter: 9 in Spool Width: 2 in Spool Hub Hole: 2 in Diameter 1. 75 mm Net Weight: 2 lbs. Learn More
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers. MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA. Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints. Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18. Glass Temp: 60-65 C (140-149 F) Melting Temp: 150-160 C (302-320 F) Nozzle Temp: 230 C (446 F) Spool Diameter: 9 in Spool Width: 2 in Spool Hub Hole: 2 in Diameter 1.75 mm Net Weight: 2 lbs. Learn More
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers. MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is to have no heavy metals, phthalates, or BPA. Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints. Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18. Glass Temp: 60-65 C (140-149 F) Melting Temp: 150-160 C (302-320 F) Nozzle Temp: 230 C (446 F) Spool Diameter: 9 in Spool Width: 2 in Spool Hub Hole: 2 in Diameter 1. 75 mm Net Weight: 2 lbs. Learn More
makerbot Pla Filament Is The Best, Most Consistent, And Most Tested Filament For The Makerbot Replicator 2 Desktop 3d Printer.makerbot Pla Filament Is A Bioplastic Derived From Corn. It's Guaranteed To Have No Heavy Metals Phthalates, Or Bpa.each Filament Color Is Comprehensively Quality Tested At Both 100-micron And 200- Micron Layer Resolutions On The Makerbot Replicator 2 To Verify It Will Perform Every Feature That Makerbot Makerware Software Offers And Reliably Slice And Print Every Type Of 3d Model.if You're New To 3d Printing, Makerbot Pla Filament Is A Good Material To Start With Because It's Easy To Use And Performs Well On Most Prints. Makerbot Pla Filament Adheres Well To Acrylic And To Blue Painter's Tape. Prints With A Large Bottom Layer May Have A Tendency To Curl. To Prevent Curling, Use Rafts. Learn More
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers. MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is to have no heavy metals, phthalates, or BPA. Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints. Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18. Glass Temp: 60-65 C (140-149 F) Melting Temp: 150-160 C (302-320 F) Nozzle Temp: 230 C (446 F) Spool Diameter: 9 in Spool Width: 2 in Spool Hub Hole: 2 in Diameter 1. 75 mm Net Weight: 2 lbs. Learn More
NovaMaker White PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Sky blue PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Silver PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Red PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Purple PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Pink PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Orange PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Grey PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Gold PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Yellow PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Black PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
NovaMaker Black PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.eSUN 3D Printer Filament: PLA PRO Size: 3mm nominal, 2.85 +/-0.05mm actualExtrusion Temperature Range: 210 to 225 Celsius PLA PRO(PLA+) Advantages: Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products. Learn More
This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns and waste of shipping cost.eSUN 3D Printer Filament: PLA PRO 3mm Size: 3mm nominal, 2.85mm +/-0.05mm actualExtrusion Temperature Range: 210 to 225 Celsius PLA PRO(PLA+) Advantages: Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products. Learn More
This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.eSUN 3D Printer Filament: PLA PRO 3mm Size: 3mm nominal, 2.85 +/-0.05mm actualColor: Regular Red (Pantone 485C)Extrusion Temperature Range: 210 to 225 Celsius PLA PRO(PLA+) Advantages: Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products.This is 3mm PLA PRO (PLA+). Please make sure you order the right size for your printer This is our regular red filament of Pantone 485C. We have several red filaments. Choose the one you prefer accordingly. Learn More
Fast Server Corp is not responsible for data, typographical, or photographic or technical errors. Pricing and availability are subject to change without notice!!!
All trademarks, service marks, product names and logos appearing on this site are the property of their respective owners. Use of them does not imply any affiliation with or endorsement by them.
We can send formal quotes or bids upon request.
Please submit contact form to request a quote.
We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 858P6 | D.U.N.S #: 08-055-2103 | UNGM #: 571579