Search results for: 'DELL+AND+9324+IN+(SELECT+(CHAR(113)+CHAR(113)+CHAR(122)+CHAR(106)+CHAR(113)+(SELECT+(CASE+WHEN+(9324=9324)+THEN+CHAR(49)+ELSE+CH'
-
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (2-(Pack)) 3DNF0017505-2$177.84Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More
-
HATCHBOX PLA 3D Printer Filament Dimensional Accuracy +/- 0.03 mm 1 kg Spool 1.75 mm Black - Pack of 2 3D-PLA-1KG1.75-BLK-2$54.99Out of stockWelcome to Hatchbox 3D Printer Filament Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Won't the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape. *When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy. Learn More
-
PLA 3D Printer Filament 1.75mm Wood TECBEARS 3D Printing Filament Dimensional Accuracy +/- 0.02 mm 2.2LBS (1 Kg) Spool No-Tangle Wood 2PK WD002$15.99Out of stockWhy Buy From TECBEARS TECBEARS PLA filament is renowned for its high strength and flexibility. Proven to maintain smooth and consistent printing experience that achieves best printing result. TECBEARS 3D Printer filament is always round, with no oily residue, no air bubbles, no kinks or breaks. Weight: 1KG (approximately 2.2 lbs) Diameter: 1.75mm(Dimensional Accuracy +/- 0.02mm) Recommended Extrusion/Nozzle Temperature: 190°C - 240°C (374°F - 464°F ) ✔High Compatibility:To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. ✔Authentic Materials:100% virgin pure raw materials, Non-toxic, Eco-friendly. ✔+/-0.02mm Dimensional Accuracy:Stable dimensional accuracy bring you smooth printing experince,no extruder nozzle blocked. ✔Perfect After-sales Service: 30-Day Money Back, 2-Year Warranty and 24x7 customer support with technical advice. Learn More