Welcome to Hatchbox 3D Printer Filament Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Won't the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape. *When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy. Learn More
Why will you choose TECBEARS TECBEARS ABS 3D printer filaments have Good transparency and gloss, suitable for crafts, model and industrial components. One of the most commonly used 3D printer materials, ABS (Acrylonitrile Butadiene Styrene) makes a great choice when creating durable items that can stand up to wear and tear and that require a higher resistance to heat. ABS plastic is flexible and breakable. The ABS 3D printer filament works best with a heated printing surface (to prevent cooling and contracting, which leads to warping), and it can be given a glossy finish after processing. High Compatibility: To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. Healthy: All of products have passed the RoHS Directive, made by 100% polylactic acid. Density is small, when printing larger volume model lighter, economical. Fast and effective 24 x 7 professional customer support providing technical solutions. Notes: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, ABS filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.> Specification: Diameter: 1.75 mm Net Weight: 2.2Bl(1kg) Best use temperature:446°F-518°F (230°C-270°C) Extruder Temperature: 176°F-248°F (60°C-80 °C) Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!" Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 5.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 6.Please reseal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 7.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 8.Different 3D printers may need different settings, we recommend you to print the draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 3 kg (1kg/Spool) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 3 x spool of PLA filaments 3 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 1.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 2.Please seal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 3.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 4.Different 3D printers may need different settings. We recommend you to print a draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 1 kg (2.2 lbs) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 1 x spool of PLA filaments 1 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Why will you choose TECBEARS TECBEARS ABS 3D printer filaments have Good transparency and gloss, suitable for crafts, model and industrial components. One of the most commonly used 3D printer materials, ABS (Acrylonitrile Butadiene Styrene) makes a great choice when creating durable items that can stand up to wear and tear and that require a higher resistance to heat. ABS plastic is flexible and breakable. The ABS 3D printer filament works best with a heated printing surface (to prevent cooling and contracting, which leads to warping), and it can be given a glossy finish after processing. High Compatibility: To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. Healthy: All of products have passed the RoHS Directive, made by 100% polylactic acid. Density is small, when printing larger volume model lighter, economical. Fast and effective 24 x 7 professional customer support providing technical solutions. Notes: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, ABS filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.> Specification: Diameter: 1.75 mm Net Weight: 2.2Bl(1kg) Best use temperature:446°F-518°F (230°C-270°C) Extruder Temperature: 176°F-248°F (60°C-80 °C) Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!" Learn More
Experience crisp, smudge-resistant professional quality text with the PG-243 pigment black ink cartridge. Designed with FINE (Full Photolithographic Inkjet Nozzle Engineering) technology, your documents will realize added sharpness, detail and quality. This genuine Canon ink cartridge is compatible with Pixma printers that utilize PG-245 and PG-245XL ink cartridges. Remember, a genuine canon XL ink cartridge means high capacity, which means more ink for more prints. Compatibility -- PIXMA TS3320 Black-- PIXMA TS3320 White-- PIXMA MG3020 Gray Wireless Photo All-in-One Inkjet Printer-- PIXMA MG3020 White Wireless Photo All-in-One Inkjet Printer-- PIXMA TS3320 Red-- PIXMA TS3120 Black Wireless-- PIXMA TS3120 White Wireless-- PIXMA TS202-- PIXMA TS302 Black Wireless Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More
Epson DURABrite Ultra 252XL/252 high yield black and standard color C/M/Y ink cartridges (T252XL-BCS), combo 4/pack is fast-drying, long-lasting ink delivers vivid, true-to-life photos and laser-sharp text. Learn More
Welcome to Hatchbox 3D Printer Filament Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Won't the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape. *When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy. Learn More
Welcome to Hatchbox 3D Printer Filament Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. Frequently Asked Questions 1) Filament not extruding properly? A: Check the type of filament you're working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer. 2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It's recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. 3) Won't the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. You can use this on the build platform on top of kapton tape. *When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy. Learn More
Ultra smooth technology With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Vacuum sealed Our vacuum sealed packaging s you to experience the best performance by isolating moisturized environment to the filaments. High compatibility Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. 3D Solutech is a professional filament manufacturer specialized in providing various colors and materials for 3d printing. Quality is our top priority as we hand checked each spool, vacuum sealed and packaged. Our filament is proven to maintain smooth and consistent printing experience that achieves best printing result. Our filament is always round, with no oily residue, no air bubbles, no kinks or breaks and backed by our 100% SATISFACTION . Check out our store for new and latest colors and materials for your 3d printer. Package Includes: 1 X 1. 75mm Real Black ABS filament (2. 2Lbs) 1 X Filament Clip Learn More
Compatible Epson models:Expression : Home XP-4100, Home XP-4105WorkForce: WF-2830, WF-2850 Helps Avoid Waste - Designed for extended use, helping reduce or eliminate material use and potentially save money. Learn More
This 4 pack of dye-based inks are used for printing great looking photos and images. When printing a photo be sure to use genuine Canon photo paper so your photos are protected from fading. Learn More
This XL 4 pack of dye-based inks are used for printing great looking photos and images. When printing a photo be sure to use genuine Canon photo paper so your photos are protected from fading. Learn More
This XL dye-based black ink tank is used for printing great looking photos and images. When printing a photo be sure to use genuine Canon photo paper so your photos are protected from fading for longer, thanks to the ChromaLife100 system. Xl individual ink tanks can optimize efficiency, as you only need to replace the ink tank that runs out. Learn More
Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. The 3D printed object will have a glossy type finish with we love it: Less warping Easy to use No heated bed required. Learn More
NovaMaker Black PLA 3D Printer Filament 1.75mm Reference Specs: Diameter : 1.75MM Tolerance Level : ± 0.03MM Print Temperature : 190-220°C / 374-428°F Print Speed : 50-100mm/s Base Plate Temperature : No Heat Required / 40-50°C Bubble : 100% Zero Bubbles Length : 325M / 355Yard Spool Diameter: 7.88"-Spool Width: 2.64" Spool Hub Hole Diameter: 2.10" Why Choose NovaMaker? ♥+/- 0.03MM TOLERANCE:NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. ♥1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. ♥100% ENVIRONMENTAL FRIENDLY: NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. ♥High Compatible With Your 3D Printer: Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! ♥100% SATISFACTION GUARANTEE:The PLA 3D printer filaments are backed by NovaMaker 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click "Add to Cart" button right now! Learn More
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers. MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA. Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints. Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18. Glass Temp: 60-65 C (140-149 F) Melting Temp: 150-160 C (302-320 F) Nozzle Temp: 230 C (446 F) Spool Diameter: 9 in Spool Width: 2 in Spool Hub Hole: 2 in Diameter 1.75 mm Net Weight: 2 lbs. Learn More
Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It's ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish with ABS. Why we love it: Prints at higher temperature Tough and durable Requires less manual finishing Process in acetone for polished finish. Learn More
Fast Server Corp is not responsible for data, typographical, or photographic or technical errors. Pricing and availability are subject to change without notice!!!
All trademarks, service marks, product names and logos appearing on this site are the property of their respective owners. Use of them does not imply any affiliation with or endorsement by them.
We can send formal quotes or bids upon request.
Please submit contact form to request a quote.
We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 858P6 | D.U.N.S #: 08-055-2103 | UNGM #: 571579