Great Savings on Ink with Genuine Canon Value Packs Print beautiful photos and documents with an improved ink formulation that gives you a wider range of colors Learn More
This combo pack includes a XL pigment black ink tank for your documents, a set of dye-based inks for printing great looking photos and images, and 50 sheets of 4"x6" glossy photo paper. Learn More
Experience crisp, smudge-resistant professional quality text with the PG-243 pigment black ink cartridge. Designed with FINE (Full Photolithographic Inkjet Nozzle Engineering) technology, your documents will realize added sharpness, detail and quality. This genuine Canon ink cartridge is compatible with Pixma printers that utilize PG-245 and PG-245XL ink cartridges. Remember, a genuine canon XL ink cartridge means high capacity, which means more ink for more prints. Compatibility -- PIXMA TS3320 Black-- PIXMA TS3320 White-- PIXMA MG3020 Gray Wireless Photo All-in-One Inkjet Printer-- PIXMA MG3020 White Wireless Photo All-in-One Inkjet Printer-- PIXMA TS3320 Red-- PIXMA TS3120 Black Wireless-- PIXMA TS3120 White Wireless-- PIXMA TS202-- PIXMA TS302 Black Wireless Learn More
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Learn More
This value pack includes a XL pigment black ink tank for your documents, and a set of dye-based inks for printing great looking photos and images. Learn More
This 4 pack of dye-based inks are used for printing great looking photos and images. When printing a photo be sure to use genuine Canon photo paper so your photos are protected from fading. Learn More
This XL dye-based black ink tank is used for printing great looking photos and images. When printing a photo be sure to use genuine Canon photo paper so your photos are protected from fading for longer, thanks to the ChromaLife100 system. Xl individual ink tanks can optimize efficiency, as you only need to replace the ink tank that runs out. Learn More
This dye-based black ink tank is used for printing great looking photos and images. When printing a photo be sure to use genuine Canon photo paper so your photos are protected from fading for longer, thanks to the ChromaLife100 system. Individual ink tanks can optimize efficiency, as you only need to replace the ink tank that runs out. Learn More
XYZprinting presents the non-toxic PLA filament for the da Vinci Jr. & mini Series. This PLA filament is compatible with our da Vinci Jr. & mini series printers which use 1.75mm diameter filament. Each filament has been tested for quality and proven for performance and comes in a 600g spool. Learn More
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers. MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA. Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints. Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18. Glass Temp: 60-65 C (140-149 F) Melting Temp: 150-160 C (302-320 F) Nozzle Temp: 230 C (446 F) Spool Diameter: 9 in Spool Width: 2 in Spool Hub Hole: 2 in Diameter 1.75 mm Net Weight: 2 lbs. Learn More
Ultra smooth technology : With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Vacuum sealed : Our vacuum sealed packaging assres you to experience the best performance by isolating moisturized environment to the filaments. High compatibility : Our filaments had been tested on various brands of 3d printer in the market and with positive customers' feedback. 3D solutech is a professional filament manufacturer specialized in providing various colors and materials for 3D printing. Quality is our top priority as we hand checked each spool, vacuum sealed and packaged. Our filament is proven to maintain smooth and consistent printing experience that achieves best printing result. Our filament is always round, with no oily residue, no air bubbles, no kinks or breaks. Package includes: 1 x 1.75mm carbon fiber filament (1.9 lbs.) , 1 x filament clip. Learn More
Why will you choose TECBEARS TECBEARS ABS 3D printer filaments have Good transparency and gloss, suitable for crafts, model and industrial components. One of the most commonly used 3D printer materials, ABS (Acrylonitrile Butadiene Styrene) makes a great choice when creating durable items that can stand up to wear and tear and that require a higher resistance to heat. ABS plastic is flexible and breakable. The ABS 3D printer filament works best with a heated printing surface (to prevent cooling and contracting, which leads to warping), and it can be given a glossy finish after processing. High Compatibility: To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. Healthy: All of products have passed the RoHS Directive, made by 100% polylactic acid. Density is small, when printing larger volume model lighter, economical. Fast and effective 24 x 7 professional customer support providing technical solutions. Notes: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, ABS filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.> Specification: Diameter: 1.75 mm Net Weight: 2.2Bl(1kg) Best use temperature:446°F-518°F (230°C-270°C) Extruder Temperature: 176°F-248°F (60°C-80 °C) Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!" Learn More
Why will you choose TECBEARS TECBEARS ABS 3D printer filaments have Good transparency and gloss, suitable for crafts, model and industrial components. One of the most commonly used 3D printer materials, ABS (Acrylonitrile Butadiene Styrene) makes a great choice when creating durable items that can stand up to wear and tear and that require a higher resistance to heat. ABS plastic is flexible and breakable. The ABS 3D printer filament works best with a heated printing surface (to prevent cooling and contracting, which leads to warping), and it can be given a glossy finish after processing. High Compatibility: To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. Healthy: All of products have passed the RoHS Directive, made by 100% polylactic acid. Density is small, when printing larger volume model lighter, economical. Fast and effective 24 x 7 professional customer support providing technical solutions. Notes: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, ABS filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.> Specification: Diameter: 1.75 mm Net Weight: 2.2Bl(1kg) Best use temperature:446°F-518°F (230°C-270°C) Extruder Temperature: 176°F-248°F (60°C-80 °C) Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!" Learn More
Why Buy From TECBEARS TECBEARS PLA filament is renowned for its high strength and flexibility. Proven to maintain smooth and consistent printing experience that achieves best printing result. TECBEARS 3D Printer filament is always round, with no oily residue, no air bubbles, no kinks or breaks. Weight: 1KG (approximately 2.2 lbs) Diameter: 1.75mm(Dimensional Accuracy +/- 0.02mm) Recommended Extrusion/Nozzle Temperature: 190°C - 240°C (374°F - 464°F ) ✔High Compatibility:To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc. ✔Authentic Materials:100% virgin pure raw materials, Non-toxic, Eco-friendly. ✔+/-0.02mm Dimensional Accuracy:Stable dimensional accuracy bring you smooth printing experince,no extruder nozzle blocked. ✔Perfect After-sales Service: 30-Day Money Back, 2-Year Warranty and 24x7 customer support with technical advice. Learn More
Dremel Nylon filament has been specifically engineered for optimal printing with your Digi lab 3D45. Nylon is a thermal plastic that softens and melts when it's heated, building your designs layer by layer. Parts made from Dremel's Nylon are stronger, more flexible and more durable than parts made from traditional PLA. Learn More
Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More
Ultra smooth technology With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Vacuum sealed Our vacuum sealed packaging s you to experience the best performance by isolating moisturized environment to the filaments. High compatibility Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback. 3D Solutech is a professional filament manufacturer specialized in providing various colors and materials for 3d printing. Quality is our top priority as we hand checked each spool, vacuum sealed and packaged. Our filament is proven to maintain smooth and consistent printing experience that achieves best printing result. Our filament is always round, with no oily residue, no air bubbles, no kinks or breaks and backed by our 100% SATISFACTION . Check out our store for new and latest colors and materials for your 3d printer. Package Includes: 1 X 1. 75mm Real Black ABS filament (2. 2Lbs) 1 X Filament Clip Learn More
Give us a chance to prove Duramic 3D is your new go-to 3d filaments Brand! Supported by manufacturer with years of research and innovation in 3D printing technology in different industries, Duramic 3D is dedicated to offer our 3D printer filaments with high-quality and stable performance, comparable to Company Basics 3D printer filament. Duramic 3D PLA printing filaments are advanced PLA+3D printing filaments produced with raw materials from Natureworks, which is the top PLA supplier in the world. Compared to ordinary PLA, Duramic PLA+ filaments delivers 8 times improved mechanical properties and printing quality. Notice: 5.Please put the end of the filament tightly into the storage holes to prevent tangling issues due to loose or bouncing spool. 6.Please reseal the unfinished spool in the resealable bag with desiccant to avoid humidity, which will prevent your spool from being brittle. 7.You can check the length scale and weight scale to monitor the remaining length and weight roughly. 8.Different 3D printers may need different settings, we recommend you to print the draft to test the optimal settings and adhesion first before printing your actual work. Specifications: Filaments Net Weight: 3 kg (1kg/Spool) Filaments Diameter and Accuracy: 1.75 mm +/- 0.05 Recommended Extrusion/Nozzle Temp: 220±10°C (410℉ - 446℉) Heated Bed Temp: 25°C - 60°C (77℉ - 140℉) Printing Speed: 40-80mm/s What you get: 3 x spool of PLA filaments 3 x Build surface 1-Month Free Trial, Lifetime Quality Promise and Money-back Service. Learn More
Fast Server Corp is not responsible for data, typographical, or photographic or technical errors. Pricing and availability are subject to change without notice!!!
All trademarks, service marks, product names and logos appearing on this site are the property of their respective owners. Use of them does not imply any affiliation with or endorsement by them.
We can send formal quotes or bids upon request.
Please submit contact form to request a quote.
We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 858P6 | D.U.N.S #: 08-055-2103 | UNGM #: 571579