Office Equipment & Supplies
Subscribe to RSS Feed
Office Equipment & Supplies
-
3D Solutech Real Yellow 3D Printer PLA Filament 1.75MM Filament Dimensional Accuracy +/- 0.03 mm 2.2 LBS (1.0KG) PLAYLW$20.08Ultra smooth technologyOur ultra smooth technology includes filaments capable of beautiful and smooth extraction to help build even the most delicate objects.Vacuum sealedWe use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible.High compatibilityOur filaments have been tested on various 3d printer brands, receiving widespread and positive customer feedback. 3D Solutech is a professional filament manufacturer specializing in providing a wide range of colors and materials for 3d printing.Quality is always our top priority, and we check each spool, vacuum seal, and package by hand to ensure optimal product quality.Our filament is a proven winner, and maintains the smooth and consistent printing experience needed to achieve the best printing results.Our filament is always round, and contains no oily residue, air bubbles, kink,s or breaks.Check out our store for the latest colors and materials for your 3d printer.Package includes:1 X 1.75mm Real Yellow PLA filament (2.2LBS)1 x Filament clip Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (5-(Pack)) 3DNF0017505-5$444.60Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (4-(Pack)) 3DNF0017505-4$355.68Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (3-(Pack)) 3DNF0017505-3$266.76Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) (2-(Pack)) 3DNF0017505-2$177.84Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
NinjaTek 3DNF00117505 NinjaTek NinjaFlex TPU Filament 1.75mm TPE.5kg Snow (White) (Pack of 1) 3DNF0017505-1$32.50Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Learn More -
20 Beautiful Colors 3D Pen PLA Filament Refills Each Color 10 Feet Total 200 Feet TTYT3D tt2010$19.99 $19.99# TTYT3D PLA 3D Pen Filament Refills: Make your 3D Drawing Masterpiece Closer to your Amazing Imagination and Creation! You will love our 20 Most Popular Colors PLA Filament ! Learn More -
3D Pen PLA Filament Refills 20 Colors 20 Feet Each Color Total 400 Feet by TTYT3D TTYT3DPLA$29.99 $29.99# TTYT3D PLA 3D Pen Filament Refills: Make your 3D Drawing Masterpiece Closer to your Amazing Imagination and Creation! You will love our 20 Most Popular Colors PLA Filament ! Learn More -
eSUN 1.75mm Light Blue PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs) Light Blue IG-C-PLAPRO175D1$21.99eSUN 3D Printer Filament: PLA PRO Color: Light BlueExtrusion Temperature Range: 205 to 225 PLA PRO(PLA+) Advantages: Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem.Prints are hard to break. PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius. Other settings are about the same.INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs. Learn More -
Dremel PLA 3D Printer Filament 1.75 mm Diameter 0.5 kg Spool Weight Green DF07-01$44.56Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More -
Dremel PLA 3D Printer Filament 1.75 mm Diameter 0.5 kg Spool Weight White Translucent DF70-01$42.84Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More -
Dremel PLA 3D Printer Filament 1.75 mm Diameter 0.5 kg Spool Weight Silver DF50-01$60.00Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More -
Dremel PLA 3D Printer Filament 1.75 mm Diameter 0.5 kg Spool Weight Purple DF05-01$40.98Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More -
Dremel DF30-01 Pink PLA Filament DF30-01$52.00Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs layer by layer. Our PLA has been designed to work best with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More -
Dremel PLA 3D Printer Filament 1.75 mm Diameter 0.5 kg Spool Weight Orange DF04-01$51.71Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More -
Dremel PLA 3D Printer Filament 1.75 mm Diameter 0.5 kg Spool Weight Gold DF51-01$54.00Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More -
Dremel PLA 3D Printer Filament 1.75 mm Diameter 0.5 kg Spool Weight Blue DF06-01$40.00Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More -
Dremel PLA 3D Printer Filament 1.75 mm Diameter 0.5 kg Spool Weight Black DF02-01$53.98Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish. Learn More
