Gloveworks Industrial Blue Nitrile Gloves - 5 mil Latex Free Powder Free Disposable Small INPF42100 Box of 100

• Gloveworks nitrile gloves offer better elasticity than vinyl gloves, better puncture resistance than latex gloves, and better chemical resistance than either.
• The gloves come with textured fingers, fingertips, and palms to provide enhanced grip, even in wet conditions.
• Powder-free and latex-free, they are ideal for food handling, electronics, and industrial applications.
• The gloves are 5 mils thick around the palm and fingers, as well as 9.5 inches from the tip of the finger to the cuff of the glove.

The Ammex Gloveworks industrial-grade nitrile, powder-free glove has a palm thickness of 4 mils and a finger thickness of 5 mils and is 9.5" long from the tip of the middle finger to the edge of the beaded wrist cuff, which is 3 mils thick. Nitrile provides better elasticity than vinyl, better puncture resistance than latex or vinyl, better abrasion resistance than chloroprene, and reduces the likelihood of allergic reaction. This glove is suitable for use in industrial applications and is textured on the fingertips, fingers, and palm for improved grip, particularly in wet environments, compared to gloves with textured fingers. This powder-free glove leaves no residue, reducing the risk of contamination compared to a powdered glove, making it suitable for use in electronic components, forensic, and laboratory applications. It also complies with Food and Drug Administration (FDA) regulations for food contact (21CFR, 170–199), and is suitable for use in the food service industry to help prevent the spread of germs and bacteria and to help prevent cross-contamination during food preparation. This ambidextrous glove is blue.

This glove has a minimum tensile strength of 10 megapascals (MPa) before aging and 10 MPa after aging. Tensile strength, measured in MPa, is the amount of force required to rip a glove; the higher the number, the stronger the glove material. This glove has an elongation of 500% before aging and 400% after aging. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage; the higher the percent, the more the glove can stretch. This glove has an Acceptable Quality Level (AQL) of 4, which means that the defect level from a large sample of the gloves will not exceed 4%. AQL is an FDA quality specification for the defect rate in surgical and exam gloves. The FDA requires an AQL of 1.5 for surgical gloves and 2.5 for exam gloves.

Disposable and limited-use gloves are used in medical, forensic, scientific, food service, and industrial applications. Disposable gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for use on either hand, some can be purchased in hand-specific models. They are offered powdered or powder-free; silicone or silicone-free; chlorinated or non-chlorinated; coated or uncoated; with a standard- or extended-length cuff; sterile or non-sterile; and with textured or smooth fingers, fingertips, and palms. A glove's abrasion, cut, and puncture resistance are defined by glove material and thickness, and may be improved with the use of exterior coatings. Abrasion resistance means the glove helps protect the hand from contact with rough surfaces. Cut resistance means the glove helps protect the hand from blades and sharp instruments. Puncture resistance means the glove helps protect the hand from objects such as needles. Chemical resistance means the glove helps protect the hand from certain chemicals, and varies by glove material. For information on the chemical resistance of this glove, consult the manufacturer's chemical resistance guide.

Gloveworks Nitrile Gloves
The toughest jobs are second nature to you. When the work demands it, you’re ready to dive in hands first.

At the same time, those hands are your livelihood. Protect them with AMMEX Gloveworks Blue Nitrile Powder Free Industrial Gloves.

These premium, industrial-grade gloves are an awesome combination of strength, comfort, and dexterity. More than 50 percent thicker than standard nitrile, they are durable and puncture resistant. At 5 mils thick in the palm with 6-mil fingertips, they’re made for working with tools and machinery.

Powder-free and latex-free, they come in extended sizes from S-XXL. Sold 100 gloves per box, 10 boxes per case.

Why choose nitrile? Nitrile has three times the puncture resistance of latex. It’s also nearly as elastic as latex, which means it conforms to the contour of your hand for a terrific fit every time.

The right texture for the job The surface is micro-roughened and the fingertips are textured for gripping power, even when the gloves are wet. The interior is polymer coated for easy donning and doffing.

How thick is your glove? The gloves are 5 mils thick in the palm with 6-mil fingertips, so they provide barrier protection from common chemicals like carburetor cleaner, and specialty chemicals like brake fluid.

Automotive These premium, industrial-grade nitrile gloves are an awesome combination of strength, comfort, and dexterity. More than 50 percent thicker than standard nitrile gloves, they are durable and resistant to abrasions.

Painting Because these gloves are powder free, there is no residue to mar a perfect finish. They're also latex free so they won't aggravate latex sensitivities.

Variety of uses Gloveworks nitrile gloves have numerous uses around the house, from repairs to cleaning to plumbing. They're also made from component materials that comply with FDA regulations for food contact.